John Clayton | Utah Back Country Pilots Association

John Clayton

UBCP Member

KBTF
John Clayton visited Taylor Flat
1 month ago in a Carbon Cub FX3 with 31" tires

Landed at Taylor Flat this morning, the airstrip was just re-opened today. The airstrip is a little rough, but very doable. There are some low power lines to the west so watch out for them, with a normal approch they won't be a factor. Landing west should be the no wind choice and landing east the first part is down hill. I landed both directions and both directions were comfortable.

8 Likes , 0 Comments


John Clayton visited Locomotive Springs
6 years ago in a Husky A1-B with 31' ABW tires

Flew into Locomotive Springs on July 27th and made two landings on the on the north south runway. The runway was in good condition with the soil being firm with little dust. There was grass that had filled in on the north end and was approximately 6 inches tall. The rest of the strip had small patches all along the runway. I made one take off on the east west and one on the north south runway. The east west runway was in the same condition as the north south. I did one take off on this

0 Likes , 0 Comments